Expert advice on repairing DJI Mavic & Phantom quadcopters after a crash, gimbal overload calibration, and motor fixes.
Drones are complex machines, and after a crash or a hard landing several subsystems can be affected at once. This guide covers the most common drone repairs we handle at our Plantation store.
Gimbal overload is one of the most frequent error codes on DJI Mavic and Phantom drones. It usually means a gimbal motor is straining against a bent arm, a damaged ribbon cable, or debris. We recalibrate the gimbal and, if needed, replace the motor or ribbon cable.
ESC and motor failures show up as a motor that won't spin or stutters. We test each ESC and motor individually and replace the failed component, then recalibrate the flight controller.
After any crash we recommend an IMU and compass calibration before the next flight. A drone that drifts or won't hold position almost always has a calibration issue rather than a hardware fault.
